Dryer installation and maintenance
1. Maintenance and maintenance of the mesh belt dryer is an extremely important and long-term work. It should be closely related to the maintenance and operation and maintenance of the workers. There should be full-time personnel on duty.
Installation test
1,The dryer should be installed on a level concrete floor and fixed with a foot bolt.
2,the installation should pay attention to the vertical of the body and the horizontal ground.
3.During installation, check whether the bolts are loose or not, and if the mainframe door is tight, if necessary, tighten.
4.Configure the power cord and control switch according to the power of the device.
5,After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.
Machine maintenance
1, the bearing serves as the full load of the machine, so good lubrication has a great relationship with the life of the bearing. He directly affects the service life and operation rate of the machine. Therefore, the lubricant must be cleaned and the seal must be good. The main oil filling of the machine. (1) Transmission bearing (2) Roller bearing (3) All gears (4) Active bearing, sliding plane.
2, the newly installed tires are easy to loose so they must be tightened frequently and must be inspected frequently.
3, pay attention to whether each machine is running normally.
4. Pay attention to the degree of wear of the parts that are prone to wear and pay attention to the replacement of the worn parts.
5, the plane of the undercarriage of the mobile device should be removed from dust and other debris to prevent the machine from hitting the unbreakable material. The movable bearing cannot move on the chassis to avoid serious accidents.
6, the bearing oil temperature rises, should stop immediately to check the reasons to eliminate.
7. If the transmission gear has impact sound during operation, it should be stopped immediately for inspection and eliminated.
